Cable Accessories

  • A2 Brass Economy Glands

    A2 brass glands for use indoors and outdoors with all types of unarmoured cable (also braid armoured cables if terminated inside an enclosure) where it is essential to prove an IP66 seal on the outer sheath.

  • A2 Glands

    CMP A2 brass glands for all types of unarmoured (and braid armoured cables when terminated inside an enclosure).

  • A2 SOLO Glands

    CMP A2 SOLO brass glands for all types of unarmoured (and braid armoured cables when terminated inside an enclosure).

  • A2F Glands

    CMP A2F globally approved explosive atmosphere glands for all types of unarmoured cables (and braid armour if terminated inside an enclosure).

  • Adapator/Reducers

    CMP Type 737 globally approved explosive atmosphere Adaptor/Reducers for cable glands/conduits.

  • Aluminium Single Bolt Cleats

    Two-piece single fixing design aluminium alloy cleat.

  • Aluminium Single Bolt Trefoil Cleats

    Single bolt aluminium alloy trefoil cleats.

  • Aluminium Two Bolt Cleats

    Two-piece two fixing design aluminium alloy cleats,

  • BW Brass Economy Glands

    BW brass glands for use with SWA cables. Used in indoor applications (not requiring weather-proof feature of an inner or outer seal).

  • BW Glands

    CMP BW brass glands for all types of steel wire armoured cables installed indoors.

  • BW LSF Brass Economy Glands

    BW brass glands for use with SWA LSZH cables. Used in indoor applications (not requiring weather-proof feature of an inner or outer seal).

  • BW SOLO Glands

    CMP BW SOLO brass glands for all types of steel wire armoured cables installed indoors.

  • Cable Gland Selection Chart

    Guidance Chart for Cable Gland selections. This chart/data is for guidance purposes only, actual dimensions of the cables and glands should always be considered before making a final selection due to the manufacturing tolerances permitted in BS6121: Part 1: 1989.

  • Cable Gland Shrouds

    CMP Products’ cable gland shrouds minimise the risk of dirt or foreign substances gathering on the cable gland and point of cable to cable interface.

  • Cable Lugs

    Tin-plated copper crimp cable lugs designed for use with low voltage (LV) cables up to 1000v.

  • CW Aluminium Economy Glands

    CW aluminium glands for use with AWA cables. Used in indoor and outdoor applications.

  • CW Brass Economy Glands

    CW brass glands for use with SWA cables. Used in indoor and outdoor applications.

  • CW Glands

    CMP CW glands for use with all types of steel and aluminium wire armoured cables (suitable for indoor and outdoor use).

  • CW LSF Brass Economy Glands

    CW brass glands for use with SWA LSZH cables. Used in indoor and outdoor applications.

  • CW SOLO Glands

    CMP CW SOLO glands for use with all types of steel and aluminium wire armoured cables (suitable for indoor and outdoor use).

  • CX Brass Economy Glands

    CX brass gland for use with all types of flexible wire braid cables (e.g. CY/SY). Used in indoor and outdoor applications.

  • CX Glands

    CMP CX industrial single seal glands for use with braid, pliable wire and stell tape armoured cables.

  • CXT Brass Economy Glands

    CXT brass gland for use with all types of flexible wire braid cables (e.g. CY/SY). Used in indoor and outdoor applications.

  • CXT Glands

    CMP CXT single seal industrial cable glands for screened flexible (EMC) wire braid cables.

  • E1FU Glands

    CMP E1FU globally approved explosive atmosphere cable glands for use with all types of types of armoured cables.

  • E1FW Glands

    CMP E1FW globally approved explosive atmosphere cable glands for use with all types of steel and aluminium wire armoured cables.

  • E1FX Glands

    CMP E1FX globally approved explosive atmosphere cable glands for use with braid and steel tape armoured cables.

  • E1W Brass Economy Glands

    E1W brass glands for use with SWA cables. Used in indoor and outdoor applications.

  • E1W Glands

    CMP E1W industrial double seal glands for use with all types of steel and aluminium wire armoured cables.

  • E2FW Glands

    CMP E2FW globally approved explosive atmosphere glands for lead sheathed steel and aluminium wire armoured cables.

  • Earth Tags

    CMP slip-on Earth Tags, installed between the Cable Gland and equipment, provide an earth bond connection as specified in BS6121:Part 5:1993 and comply with category B rating specified in IEC 62444.

  • Entry Thread Sealing Washers

    CMP entry thread sealing washers are designed to maintain the Ingress Protection rating between the equipment and the Cable Gland, it may be necessary to fit an Entry Thread Sealing Washer at the equipment-to-gland entry interface.

  • Helios Stainless Steel Fire Performance Cleats

    CMP Helios Stainless Steel Fire Performance Cleats for use with fire performance cables. These fire resisting supports help to maintain the electrical systems integrity for any critical circuits during an emergency situation to enable safe evacuation.

  • Locknuts

    CMP locknuts used in securing cable glands and components to a gland plate/enclosure or into equipment.

  • Low Voltage Straight Resin Joint Kits

    Straight cast resin cable joints are suitable for plastic and paper insulated LV cables. These joints are suitable for use in multiple applications (i.e. power, telecoms, signalisation).

  • LSOH Two Bolt Cleats

    Plastic Low Smoke Zero Halogen LUL Approved Two Bolt Cleat for larger cable diameters. Resistant to weather, sunlight and corrosive environments such as oils and most chemicals.

  • Mechanical Connectors

    A selection of range taking mechanical brass in-line and shear-head connectors, used to connect cables of equal cross-sectional area, suitable for low voltage (LV) applications up to 1000v.

  • Nylon Cable Ties

    Non-Releasable Cable Ties manufactured from Nylon 6.6 offering high resistance to bases, oils, greases and chloride solvents. Suitable for fixing cable bundles.

  • Plastic Cable Glands

    Standard metric range of nylon/polyamide cable glands for unarmoured cables in industrial applications.

  • Polypropylene Clingstrap Cleats

    The clingstrap cable cleat is a comprehensive range of single fixing cable cleats to provide a simple, but strong means of securing cables.

  • Polypropylene Two Bolt Cleats

    The two part dual fixing cable cleats are manufactured from high strength polypropylene and designed to be easily stacked to save time and space.

  • PX2K-REX Glands

    CMP PX2K-REX globally approved explosive atmosphere RapidEx barrier cables glands suitable for use with all types of armoured cables.

  • Reduced Palm Lugs

    Reduced (Narrow) palm tin-plated copper lugs designed for use with low voltage (LV) cables up to 1000v. The narrow palm of these lugs allows for easier installation than our standard range of copper lugs.

  • Reliance Aluminium Trefoil Cleats with LSF Liner

    CMP Reliance Aluminium Trefoil Cleats with LSF Liner for use with 3 x cable cleating solutions.

  • Sabre Single Bolt Plastic Cleats

    CMP Sabre Single Bolt Plastic Cleats, used for the retention and securing of single cables without damaging or deforming the cable. Available in Nylon and Low Smoke & Fume (LSF) materials.

  • Saturn Stainless Steel Quad Cleats with LSF Liner

    CMP Saturn Stainless Steel Quad Cleats with LSF Liner for use with 4 x cable cleating solutions.

  • Serrated Washers

    CMP stainless steel 316 graded serrated washers are fitted internally to the equipment before a locknut and act as an anti-vibration device to prevent the Cable Gland or accessory from inadvertently loosening in service.

  • Splice Connectors

    Tin-plated copper splice (butt) connectors are used to connect cables of equal cross-sectional area, suitable for all low voltage (LV) applications up to 1000v.

  • Stainless Steel Cable Ties

    Stainless steel 316 grade roller-ball locking cable ties are manufactured to be more resistant to chemicals and corrosive materials. Suitable for fixing cable bundles.

  • Stopping Plugs

    CMP globally approved explosive atmosphere stopping plugs for use with cable glands/conduits. Available in three versions, the Types 747 (Recessed), 757 (Hexagonal Head) and 767 (Dome).

  • T3CDS Glands

    CMP T3CDS globally approved atmosphere cable glands suitable for use with all types of armoured cables.

  • TE1FU Glands

    CMP TE1FU globally approved atmosphere cable glands suitable for use with all types of armoured cables. Only available in stainless steel material.

  • Telcleat LDPE

    Single piece, single fixing design low density polyethylene (LDPE) cleat.

  • Telcleat LSOH

    Single piece, single fixing low smoke zero halogen cleat.

  • Transformer Lugs

    Transformer (four hole) tin-plated copper lugs are designed to fit most common transformer fixings with M8 studs/holes, suitable for use with low voltage (LV) applications.

Latest News

Read More