BATT Part No: 91470
Section: AWG 24
Application: RS-232, RS-422, RS-485, KNX(EIB)-bus, LonWorks, ModBus, M-Bus, CAN-bus, BACnet or general interface systems. Control cable.
Conductor: Tinned copper wire, 7 strands 0.6mm
Insulation: PE 1.7mm
Colour code: White with blue stripe / blue with white stripe
White with orange stripe / orange with white
Wrapping: At least 1 layer of plastic tape 0,023 mm
Collective Screen: Overall aluminium screen + drain wire
Braiding: Tinned copper
Outer Sheath: PE - Black, 8.6mm
Fire Propagation: Test on single cable: IEC 60332-1
Test on bunched cable: IEC 60332-3
Conductor Cross-section: AWG 24 Nom.
DC Resistance per core at 20° C: < 88 max Ω/km
Insulation Resistance at 20° C: > 5GOhm*km min Ω*km
Mutual Capacitance c-c: < 42 max nF/km
Mutual Capacitance: <76 max nF/km
Inductance: <1 max mH/km
Test Voltage - Core/Core: 1000 V
Test Voltage - Core/Screen: 1000 V
L/R Ratio: 25 max µH/Ω
Operating Voltage: 300 V
Impedance: 120 Ohm
Temperature Range: During operation: -5° C up to +50°C
During installation: -30° C up to +90°C
Min. Bending Radius: 6 x cable diameter

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.