Accessibility Page Navigation
Style sheets must be enabled to view this page as it was intended.
Print Header
Border Top

H07V-U 450/750v Solid Conductor

Application: These cables are to be installed in pipes on, in and beneath plaster as well as in closed installation ducts. To be used directly on, in and beneath plaster. For the inner wiring of switchboard and distributors these cables are to be used with alternating nominal voltage up to 1000 V or a direct voltage up to 750 V against ground. The direct operating voltage is permitted up to 900 V against ground when they are used in rail coaches. The product corresponds to the directive 2006/95/EG (low voltage directive).

Nominal voltage: 450 / 750V

Test voltage: 2.500V

Temperature range VDE/HAR: Flexing 5°C to 70°C, Fixed installation -40°C to 70°C

Copper conductor: Bare, single wired acc. to VDE 0295 cl.1

Insulation: PVC TI1 acc. to HD 21.1 S3

Core identification: acc. to VDE 0293

Standards: acc. to VDE 0281 part 3 acc. to HD 21.3 S3

 

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.  

Technical Information

Batt Part No. Core Size Colour/Reference Quote
16027 1 1.5 Black Get Quote
16047 1 2.5 Green / Yellow Get Quote
16044 1 2.5 Brown Get Quote
16042 1 2.5 Blue Get Quote
Related Products
Border Bottom