Accessibility Page Navigation
Style sheets must be enabled to view this page as it was intended.
Print Header
Border Top

SIENOPYR FR-PROFIBUS

Part Number: 91505
Application: For wiring on shipboard and offshore
Halogen and silicone free
Number of electrical wires: 2
Shield: Oerlapped aluminium clad foil, sheathed in a braided screen of tinplated copper wires
Diameter of inner conductor: 0.67mm
Diameter of inner sheath: 8mm
Diameter of cable sheath: 9.8mm
Tolerance: 0.5mm
Outer diameter: 8mm, bus connectors can only be connected after the out sheath has been stripped
Insulation: PE
Inner sheath: Halogen free polymer (HM4)
Sheath: Halogen free cross linked polymer
Wire colour: Red / Green
Sheath colour: Black
Bending radius: Single bend - 98mm
Multiple bend - 196mm
Traction stress: 100N
Weight: 110kg/km
Ambient temperature: Operating, storage and transport: -35 - +80°C
During instlattion: -15 - +80°C
At ambient temperatures below -15 degrees Celsius, the cable must
not be subjected to any movements other than the normal vibration
levels encountered on board ship
Chemical resistance: To mineral oil: Resistant to diesel fuel according to DIN VDE 51601, ASTM oil No. 2
according to DIN 53521, oil, NATOCode 0178, BWTL 91500031/2
according to VG 95214 Part 4, hydraulic fluid, NATOCode H515,
BWTL 91500020 according to VG 95214 Part 4, cold cleaning
solvent, BW-TL 68500017 according to VG 95214 Part 4, deionized
water according to VG 95214 Part 4, deionized water with 3.5% NaCl
To grease: Resistant
To water: Conditional resistance
Radiological resistance / to UV radiation: Resistant
Damping ratio per length (max): 9.6kHz - 0.0030 dB/m
38.4kHz - 0.0050 dB/m
4MHz - 0.022 dB/m
16MHz - 0.045 dB/m
Impedance: Nominal value - 150Ω
9.6kHz - 250Ω
38.4kHz - 185 Ω
3MHz - 20MHz - 150 Ω
Relative symmetrical tolerance: 10%
Loop resistance per length / max: 110 Ω/km
Insulation resistance coefficient: 16000GΩ.m
Operating voltage: 100V
Standards: Det Norske Veritas (DNV), Germanische Lloyd (GL), Lloyds Register of Shipping (LRS)

 

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.    

Technical Information

Batt Part No. Core Size Colour/Reference Quote
91505 Black Get Quote
Related Products
Border Bottom