Accessibility Page Navigation
Style sheets must be enabled to view this page as it was intended.
Print Header
Border Top

BS5308 Cable Part 1 Type 2 LSZH CAM SWA LSZH 0.6/1

BATT Part No: 85926
Conductor: Bare copper class 2
No of pairs: 1
No of cores: 2
Nominal cross section: 2.50 mm²
Conductor diameter: 1.97mm
Insulation: LSZH
Min average thickness: 0.70mm
Approx. outer diameter over insulation: 3.365mm
Overall shielding: All / polyester tape
Drain wire: Tinned copper
Barrier: LSZH
Nominal thickness: 0.9mm
Nominal outer diameter of cable: 8.7mm
Armouring: SWA, galv steel wire
Approx. diameter over armour: 10.4
Outer sheath: LSZH
Nominal thickness: 1.40mm
Nom outer diameter of cable: 13.22mm
Max DC resistance per core at 20°C: 7.60 Ohm/km
Max insulation resistance at 20°C: >200 M Ohm/km
Min allowable bending radius: 18 x overall diameter
Mutual capacitance: 120 pF/m
L/R ratio: <40 µH/ohm
Voltage: 600/1000 volts
Standards: Flame retardant, IEC 60332-3 cat C and IEC 60754-1 and -2

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.  

Technical Information

Batt Part No. Core Size Colour/Reference Quote
Related Products
Border Bottom