Applications: These cables may be used for external applications, exposed or in ducts. They include a black PE over sheath for UV protection.
Supports Full and Half-Duplex transmission, Digital Video, Analogic Video "Broadband" or "Baseband", 16 Mbps Token Ring, 100 Mbps TP-PMDD, 100 BASE - T, 1000 BASE - T (Gigabit Ethernet), 155/622 Mbps ATM, 1.2 Gbps ATM

Conductor: 23 AWG (0.53mm) bare annealed solid Copper

Colour table:
1 White/Blue and Blue
2 White/Orange and Orange
3 White/Green and Green
4 White/Brown and Brown

Pairs: Twinned pairs with variable lay-lengths

Insulation: Polyolefin

Ripcord: Polyester, under the sheath

Inner sheath: PVC

Over sheath: PE

DC electrical resistance at 20ºC, max: 8.90 Ω/100m (328 ft)

DC resistance unbalance, max: 3.0 Individual pair, %

Mutual capacitance (nominal):5.60 nF/100m (328 ft) @ 1kHz

Delay skew (nom): 45ns/100m

Installation temperature: 0 - 50ºC

Service temperature: -20 - 60 ºC

Operating voltage: 125V

Nominal propagation speed (NPS):70(% Light Speed):

Characteristic impedance (Ω):
Frequency
1.0 - 100 MHz 100±15
100 - 250 MHz 100±22

Return loss (RL):
Frequency
1.0 - 10 MHz 20+5log(f)
10 - 20 MHz 25
20 - 100 MHz 25-7log(f/20)

External diameter max: 7.65 mm

Weight: 55 kg/km

Min. bending radius after installation: 4 x External Diameter

Standards: ANSI/TIA/EIA 568-B.2-1 (Category 6), ISO/IEC 11801, EN50173

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.