Accessibility Page Navigation
Style sheets must be enabled to view this page as it was intended.
Print Header
Border Top

Fire Resistant Power Cable BS7846 – F120 Enhanced

 
Application:


Special fire resistant cables designed to survive and operate during arduous fire conditions. These are designed as per BS 7846 standard and are LPCB approved for F120 fire test as per BS
8491 standard as well as BASEC approval.
As described in BS 8519, fire resistant cables are classified for Life Safety and Fire Fighting systems with different fire survival time of 30 minutes, 60 minutes or 120 minutes. These cables meet the 120 minutes fire survival test. During the F120 fire survival test as per BS 8491 the cable sample is subjected to fire and mechanical shock with direct impact on the cable as well as being subjected to high pressure water spray.

• Areas where there is a high concentration of people eg. schools,
shopping malls, railway stations etc.
• Services where circuit integrity is very important under fire conditions eg.
special equipment in hospital
• Essential safety circuit eg. fire detection, fire alarm etc.
• Power supply to equipment used in fire-fighting eg. sprinkler pumps
• In large buildings where fire strategy involves evacuation of occupants in
phased manner.

Conductor: Plain annealed copper stranded circular (4 - 35mm²) or shaped (50 - 400mm²)conductor complying with BS EN 60228 Class 2


Insulation:
Primary insulation: Mineral ceramic (Mica/Glass) fire resistant tape
Secondary insulation: 90°C cross - linked insulation
Core identification: 2 core - Brown and Blue
3 core - Brown, Black and Grey
4 core - Blue, Brown, Black and Grey


Bedding: Thermoplastic LSZH bedding compound


Armour: Single layer of galvanised steel wires

Sheath: Robust thermoplastic LSZH sheath


Colour: Black (other colours available for special order)


Properties:
Reduced flame propagation, low smoke and corrosive gas emission.


Installation: Minimum recommended installation temperature: 0°
Should be installed in accordance with BS7671/IEE Wiring regulations.

Bending radius:
Circular conductors: 6 x overall diameter
Shaped conductors: 8 x overall diameter

Temperature: The tabulated ratings are based upon a 30°C ambient temperature and 90°C operating temperature

Standards:


Approvals:
BS 8519 - Category 1, 2 and 3
BS 7846 - F120, 120 mins fire, water jet and direct impact

BASEC
LPCB

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.  

 


 

Technical Information

Batt Part No. Core Size Colour/Reference Quote
57265 3 16 mm2 Black Get Quote
57316 3 25 mm2 Black Get Quote
57317 3 35 mm2 Black Get Quote
57281 4 16 mm2 Black Get Quote
57266 4 25 mm2 Black Get Quote
57267 4 35 mm2 Black Get Quote
57268 4 50 mm2 Black Get Quote
57269 4 70 mm2 Black Get Quote
57270 4 95 mm2 Black Get Quote
57271 4 120 mm2 Black Get Quote
57272 4 150 mm2 Black Get Quote
57273 4 185 mm2 Black Get Quote
57353 4 240 mm2 Black Get Quote
57275 4 300 mm2 Black Get Quote
Related Products
Border Bottom