Accessibility Page Navigation
Style sheets must be enabled to view this page as it was intended.
Print Header
Border Top

33KV Single Core AWA LSZH Cable BS7835 IEC60502-2

Applications: Mains power transmission cable. Suitable for direct burial.

Conductor: Plain annealed Circular compacted copper, class 2 stranded circular compacted conductors

Conductor identification: Coloured tape under the screen

Insulation: XLPE (Cross linked polyethylene)

Screen: Semi-conducting layer with a copper tape screen covering each core

Bedding: LSZH

Armour: Single core AWA (Aluminium wire armour)

Outer sheath: LSZH

Colour: Red

Voltage: 19 / 33 KV

Minimum bending radius: 20 x overall diameter

Operating temperature: Maximum 90°C, minimum bending 0°C

Combustion characteristics: HCL emission 0.5% in accordance with BSEN50267-1
Low smoke classification based on 3 metre cube test.
Complete cables comply with the requirements of fire test
BSEN50266-1:2001 (previously BS4066 Part 1)

Standards: BS6622: Power cables, thermosetting polymer insulated high voltage
IEC60502-2: Power cables with extruded insulation and their accessories for rated voltages from 6kV to 30kV (Um=36kV)
Flame Propagation to BS EN 60332-1-2
Full current ratings refer to Table BEC108
A full range of termination and installation accessories are available.

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.  

 

Technical Information

Batt Part No. Core Size Colour/Reference Quote
Related Products
Border Bottom