Accessibility Page Navigation
Style sheets must be enabled to view this page as it was intended.
Print Header
Border Top

PX2K – Brass flameproof barrier braid gland – Prem



CMP Type PX2K triple certified flameproof (Type ‘d’), Increased Safety (Type ‘e’) and restricted breathing (Type ‘nR’ cable gland for use in Zone 1, Zone 2 and Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. All CMP connectors are EMC tested.



Design specifications:

BS 6121:Part 1:1989. EN50262:1999

Continuous operating temperature:

-60°C to +100°C

Cable gland material:

Brass, Electroless, Nickel plated brass, Stainless steel, Aluminium

Seal material:

CMP SOLO LSF thermoplastic elastomer / Epoxy resin barrier compound

Cable type:

Single wire armour (SWA), Aluminium wire armour (AWA), Wire braid armour (eg SWB), screened flexible wre braid (eg CY/SY), Pliable wire armour (PWA), Steel tape armour (STA), Strip armour (eg ASA)

Armour clamping:

Detachable compound tube / Cone and AnyWay universal clamping ring

Sealing technique:

Unique CMP ‘LRS’ TM Outer Seal (Load Retention Seal)

Sealing Areas:

Inner compound barrier and outer sheath

Compliance standards:

EN 60079-0, EN60079-1, EN600079-7, IEC 61241-0, EN61241-1

IEC 60079-0, IEC 600079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1













Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.  

Technical Information

Batt Part No. Core Size Colour/Reference Quote
Related Products
Border Bottom