Accessibility Page Navigation
Style sheets must be enabled to view this page as it was intended.
Print Header
Border Top

PE/CAM/TCWB/PVC/SWA/PVC

BATT Part Number:91390

Type:9841/SWA/PVC

Nominal voltage rating:300 / 300 volts

Conductors
Material:Tinned copper class 2
No of pairs:1
No of cores:2
Nominal cross section:24 AWG (circa 0.22sqmm)

Insulation of conductors
Material:PE
Insulation thickness:0.27mm
Insulation diameter:1.15 +/- 0.1
Colour:White and Blue / Blue and White

Overall shielding
Material:All / Polyester tape
Drain wire:Tinned copper / AWG 24
Tinned copper wire braid:Tinned copper

Bedding
Material:PVC
Nominal diameter:4.00 mm

Armouring: SWA
Material:Steel wires
Diameter over armour:5.80mm

Outer Sheath
Material:PVC
Nominal thickness:1.30mm
Nominal outer diameter:8.4 +/- 0.50 mm

Max DC Resistance per core at 20°C: < 80 Ohm/Km

Max insulation resistance at 20°C: >5 G Ohm/Km

Standard: IEC 60332

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.  

Technical Information

Specification

Batt Part No. Core Size Colour/Reference Quote
91390 2 24mm2 Get Quote
Related Products
Border Bottom