Applications: Power cable suitable for power networks, direct burial, outdoors, indoors and in cable ducts

Conductors: Plain annealed stranded copper

Conductor stranding: Class 2 – Stranded circular or circular compacted

Conductor identification: Brown

Insulation: XLPE (Cross linked polyethylene)

Core identification: Brown

Bedding: PVC (Polyvinyl-Chloride)

Armour/Protection: AWA (Aluminium wire armour) non-magnetic

Sheath/Jacket: PVC (Polyvinyl-Chloride)

Colour: Black

Voltage: 600/1000v

Operating temperature: Maximum 90°C, Minimum bending 0°C

Minimum bending radius: 6 x overall diameter (Wherever possible, larger installation radius should be used)

Standards: BS5467: Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000V and 1900/3300V. IEC 60502: Power cables with extruded insulation and their accessories for rated voltages from 1kV to 30kV. Flame Propagation Test to BS EN 60332-1-2 for single cable.

Notes: For current rating refer to Table 4E3A. If you are considering installing in high UV exposure and/or high/low ambient temperatures i.e. desert/arctic conditions then special sheathing may be required

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.