11kv SWA mains power cable to BS7835 & IEC60502-2

Conductor: Plain annealed circular compacted copper

Conductor identification: coloured tape under the screen, brown, black and grey 

Insulation: XLPE (Cross linked polyethylene)

Screen: Semi-conducting layer with a copper tape screen covering each core

Bedding: LSZH (Low smoke zero halogen)

Armour/Protection: SWA (Single wire armour)

Jacket/Sheath: LSZH (Low smoke zero halogen)

Colour: Red

Voltage: 6350/11000v

Operating temperature: Maximum 90°C, minimum bending 0°C

Standards: BS7835: Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6kV up to 19/33kV having low emission of smoke and corrosive gases when affected by fire

Flame Propagation Test to BS EN 60332-1-2:2004 for single cable and BS EN 60332-3-24:2009 (Cat C) for multiple cables

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.