Accessibility Page Navigation
Style sheets must be enabled to view this page as it was intended.
Print Header
Border Top

Electric Point Heating Cable

Electric Point Heating Cable

Application: Electric Point Heating Cable to Network Rail specification

Conductor: Tinned annealed flexible copper

Insulation: EPR (Ethylene Propylene rubber)

Sheath: PCP (Polychloroprene) more commonly known as OFR (Oil resistant and flame retardant)

Sheath colour: Black

Core identification:
4 core: 2 x Blue & 2 x yellow,
8 core: 2 x Black, 2 x blue, 2 x brown & 2 x yellow

Operating temperature: Maximum 70°C, Minimum bending -30°C

Voltage: 300/500v

Standards: Network Rail Cable to NR/SR/ELP/40045, BS6360, BS7919

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.  

Technical Information

Batt Part No. Core Size Colour/Reference Quote
22327 4 1.5sqmm (30/0.25mm) Black Get Quote
22337 8 1.5sqmm (30/0.25mm) Black Get Quote
22338 8 4.0sqmm (56/0.3mm) Black Get Quote
Border Bottom