Fire performance power cable to BS6837 suitable as fire alarm cable and emergency lighting cable

Conductor: Plain annealed stranded copper to BSEN60228 (class 1) 

Fire barrier: MGT (Mica glass tape)

Insulation: XLPE (Cross linked polyethylene)

Core identification: 2 core:Brown & blue, 3 core: Brown, black & grey, 4 core: Brown, grey, blue & black, Multicore: White cores with black numerals

Bedding: LSZH (Low smoke zero halogen)

Armour/Protection: SWA (Single wire armour)

Sheath/Jacket: LSZH (Low smoke zero halogen)

Colour: Black

Voltage: 600/1000v

Operating temperature: Maximum 90°C, minimum bending: -25°C

Standards: BS6387, Categories C, W & Z, Specification for performance requirements for cables required to maintain circuit integrity under fire conditions
IEC60331: Tests for electric cables under fire conditions - circuit integrity 
BS EN 61034:2005: Measurement of smoke density of cables burned under defined conditions. Test procedure and requirements
BS6724: Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000V and 1900/3300V, having low emission of smoke and corrosive gases when affected by fire
BS7846: Electric cables. 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
BS EN 50266:2001: Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables

Fire Resistance BS6387 Categories C, W & Z:
IEC60331: 750 deg C for 3 hours
Flame Propagation BS EN 50266 parts 1 and 3, IEC 60332-3, BS EN 60332:2004
Smoke Emission IEC 61034, BS EN 61034:2005
Corrosive Acid Gas BS EN 50267-2-1:1999, IEC 60754-1

Applications: Fire performance cables maintain circuit integrity in a fire and so are suitable for fire detection, alarm and emergency lighting systems

Minimum Bending Radius:  6 x Overall Diameter for Circular Conductors. 8 x Overall Diameter for Shaped Conductors