Applications: Armoured aluminium mains cable to British Standard BS5467 suitable for power networks

Conductors: Solid sectorial aluminium

Insulation: XLPE (Cross linked polyethylene)

Core identification: Brown, Black, Grey & Blue

Bedding: PVC (Polyvinyl-Chloride)

Armour/Protection: SWA (Single wire armour)

Sheath/Jacket: PVC (Polyvinyl-Chloride)

Colour: Black

Voltage: 600/1000v

Operating Temperature: Maximum 90°C. Minimum bending 0°C

Minimum bending radius: 10 x overall diameter (wherever possible, larger installation radi should be used)

Conductor identification: Brown, Grey, Blue and Black

Standards: BS5467 Electric cables. Thermosetting insulated, armoured cables for voltages of
600/1000V and 1900/3300V
Flame Propagation Test to BS EN 60332-1-2 for single cable

Notes: For current ratings refer to Table 4L4, Table 4J4

If you are considering installing in high UV exposure and/or high/low ambient temperatures i.e. desert/arctic conditions then special sheathing may be required.

Whilst BATT CABLES plc endeavours to ensure the information on the website, specification sheets and all other technical information is accurate, the information is for guidance only and it is subject to change without notice or liability. Batt Cables Plc is not responsible for the consequences of any inadequacies, inaccuracies or other deficiencies contained therein. When selecting cable accessories, please note that the actual cable dimensions may vary due to manufacturing tolerances.